Numerical solutions of the shallow water equations with discontinuous bed topography

A simple scheme is developed for treatment of vertical bed topography in shallow water flows. The effect of the vertical step on flows is modelled with the shallow water equations including local energy loss terms. The bed elevation is denoted with z_b^‐ for the left and z_b⁺ for the right values at each grid point, hence exactly representing a discontinuity in the bed topography. The surface gradient method (SGM) is generalized to reconstruct water depths at cell interfaces involving a vertical step so that the fluxes at the cell interfaces can accurately be calculated with a Riemann solver. The scheme is verified by predicting a surge crossing a step, a tidal flow over a step and dam‐break flows on wet/dry beds. The results have shown good agreements compared with analytical solutions and available experimental data. The scheme is efficient, robust, and may be used for practical flow calculations. Copyright © 2002 John Wiley & Sons, Ltd.     

关于图的同构判定方法的探讨

对于两图的同构的判定方法进行较深入的探讨,给出判定两图同构和判定两图不同构的几种方法,并对其判定方法的优劣进行比较.     

非对称量子阱中非线性光学吸收系数的计算

非对称量子阱中的非线性光学效应因其潜在的实用价值而引起人们的广泛关注,而量子阱内带间的光学吸收问题对研究远红外光学探测器件具有重要的理论指导意义.以Pschl-Teller势阱为例研究了影响非对称量子阱中的非线性光学吸收系数的因素.考虑到带间的电子弛豫,用量子力学中的密度矩阵算符理论导出了Pschl-Teller势阱中的线性与三阶非线性光学吸收系数的表达式.因该势阱中有两个可调参数,通过调节系统的参数,发现该系统的非线性光学吸收系数呈规律性的变化.以典型的GaAs/AlGaAs非对称量子阱为例作了数值计算,通过调节系统的参数,数值计算结果表明,入射光强以及系统的非对称性对量子阱的非线性光学吸收系数有较大的影响,从而为实验上研究非对称量子阱的非线性光学效应提供了必要的理论依据.     

小尺寸铕(Ⅲ)配合物荧光纳米颗粒的制备

利用再沉淀法分别制备出了小尺寸(~10nm)纯相和杂相的Eu³⁺配合物荧光纳米颗粒。所制备的纯相的荧光纳米颗粒在水溶液中容易聚集,并且荧光猝灭严重。相比较而言,掺有适量疏水性硅烷的杂相纳米颗粒则具有较强的荧光、均匀的尺寸和良好的分散性。硅烷在碱性环境下(pH=9)迅速地水解,而后在纳米微粒的表面形成二氧化硅薄层。亲水的二氧化硅薄层消除了Eu³⁺配合物纳米颗粒间的疏水相互作用,进而防止了纳米颗粒的聚集,从而导致了杂相荧光纳米颗粒发光性能的提高。     

二维变系数反应扩散方程的紧交替方向差分格式

1 引言 在研究热传导过程、气体扩散现象和电磁场的传播等问题时，常常遇到抛物型偏微分方程。用有限差分方法研究这类问题的数值解法目前已经有了许多工作。对于二维、三维抛物方程的数值求解比较理想的方法是交替方向法。     

锥形透镜光纤聚焦特性研究

锥形透镜光纤(TLF)是实现光纤与平面光波光路(PLC)芯片高效耦合的核心元件。了解和掌握其聚焦特性是指导平面光波光路尾纤封装技术的关键。给出了表征锥形透镜光纤聚焦特性的两个参量出射光斑直径和远场发散角的理论分析模型,其误差小于1.14%;采用光束传播法数值模拟了锥形透镜光纤中的光波传输和模斑的演化,确定了锥形透镜光纤端面出射光斑的大小;优化锥形透镜光纤结构参量为:拉锥长度300μm,锥角0.733°,透镜曲率半径13.485μm;建立了基于数字摄像机的锥形透镜光纤出射光场测试系统,提出了物理光学反向推演法,计算出锥形透镜光纤聚焦光斑尺寸和远场发散角。理论与实验结果有着良好的一致:对于相同结构参量的锥形透镜光纤,实验反推法得到的出射光斑尺寸与理论值相比误差为3.15%,远场发散角误差为3.67%。     

A solution of the DGLAP equation for gluon at low x

We obtain a solution of the DGLAP equation for the gluon at low x first by expanding the gluon in a Taylor series and then using the method of characteristics. We test its validity by comparing it with that of Glück, Reya and Vogt. The convergence criteria of the approximation used are also discussed. We also calculate εF ₂(x,Q)²/ε In Q ² using its approximate relations with the gluon distribution at low x. The predictions are then compared with the HERA data.     

Effective magnetic properties of a composite material with circular conductive elements

Effective magnetic properties of a composite meta-material consisting of periodically arranged circular conductive elements are studied theoretically. A general expression for the effective bulk permeability is obtained with mutual effects and lattice ordering being taken into account. The resonance frequency of the permeability is found to be strongly dependent on the size and shape of the unit cell. Frequency dispersion of the permeability is studied with special attention paid to the frequency range, where negative values of the permeability are possible. Corresponding recommendations for optimisation of the meta-materials with negative permeability are made. The results are confirmed by numerical simulations of the finite structure behaviour in an external magnetic field. Received 19 April 2002 Published online 31 July 2002     

行波型热声发动机的分布参数法热力分析

在现有热声网络模型的基础上 ,对行波型热声发动机采用分布参数法进行了详细地分析 ,得到了较为完整的分布参数法网络模型 ,并给出了该模型的定性关系式 ,所得结果与采用集总参数法的结果有很大差异。分析表明 ,分布参数法更适合于一般的系统情况 ,集总参数法仅仅在一定条件下才适用。文中对一个实际系统应用分布参数法进行了分析 ,得到一些结论 ,对于我们设计行波型热声发动机有非常重要的理论指导意义     

方形自聚焦透镜的研制

经过方形玻璃丝的加工、离子交换及成品的精密加工等过程，成功制出了方形自聚焦透镜.并采用聚焦成像和雅明干涉等方法对其光学特性进行测试，得出了方形自聚焦透镜本身所具有的一些特性：中心部分畸变较小，成像性能好；四个棱角内的球差较大，像质较差;折射率分布不具有旋转对称性，而是与方向和半径有关.